Robert,
Sorry about not getting back to you sooner.
Remember that 2” x 10” boards actually measure more like 1 ½” x 9 ½”.
For waterproofing the wood it probably is best to use two coats of a “Thompson Wood Sealer” and then two coats of Polyurethane allowing sufficient drying times between coats (see directions on the individual product cans for applying multiple coats).
I would suggest putting the pool liner in before installing the interior boards. You can secure the interior boards on top of the pool liner.
It appears that you are securing the pool liner to the plywood using vinyl cement so the only real bunching of the vinyl may be in the corners. You can stretch the vinyl in the corners by using a blow dryer and putting some type of pressure (weight) on the corner to keep it semi taut. But, the vinyl probably will never fit totally flush in the corner (i.e. look at a vinyl liner in a square or rectangular pool).
Have a good day and good luck with the project.
Joe
No comments:
Post a Comment